Advanced Marijuana Guide
Notes:
You’ll need to purchase the following:
36x Marijuana Seeds
9x Bucket Pot
5x Soil Pack (1 soil pack can fill 2 Bucket Pots)
2x Microwave
2x Foil Machine
2x Small Light Tent
2x Water Extension Kit
4x Big Barrel O’ Water
The listed consumables are enough to sustain the operation for 40 minutes.
Preparing for the operation
Rent a Property of your choice, make sure it has at least 2 residential plugs as they will be needed for the Microwaves and Small Light Tents, it’s preferable if you select a room with 2 outlets as it may not require you to pick up the Wet Hash to move it around. The process of making Marijuana is illegal so make sure to pick a room with less exposure to the outside world as you wouldn’t want to get raided.
The Process
STEP 1: Place down the light tents
Deploy the Small Light Tents, you can use your physgun to freeze them in place, make sure you don’t break the small table on the side of them as it will be needed, avoid placing them in cramped places. Insert their electrical plugs into the socket.
STEP 2: Upgrading the tents
Stand close to one of the Small Light Tents and look towards it. Open your inventory, select the Water Extension Kit and choose the option “Use”. This will deploy a computer on the small table, repeat the process for the other tent.
STEP 3: Filling up with water
Look into the screen of the newly deployed Computers and you’ll see the operations available. Fill up the system with water by pressing “E” on the monitor (this will remove 1x Big Barrel O` Water from your inventory).
STEP 4: Placing down the Pots
Deploy the 9x Bucket Pots and drag them by hand into the Small Light Tents, the pots will snap into place. Remember the Tents can hold a maximum of 6 pots inside them, this is why 2 tents are needed. You can activate the watering system after this by pressing “ALT+E” on both tents monitors.
STEP 5: Placing down the soil and seeds
Just press “E” on the pots inside the tents to load them with soil, pressing “E” again on a pot with soil already inside it will plant a seed in it. It’s important that the water system has been turned on before this operation, otherwise the seeds will start dying immediately. Make Sure To Close the Tents after planting the seeds as the process will generate a strange smell which can lead to unwanted company.
STEP 6: Harvesting
Once the plants are ready they will display 0%, press “E” on the pots to harvest the marijuana. A single Big Barrel O’ Water can sustain the watering of 2 full harvests, so you can place new seeds inside the pots immediately after harvesting.
STEP 7: Drying and Packing
It’s recommended to place your Microwave and Foiling Machine in such a way so that once the Hash drops from the Microwave it will land on the Foiling Machine and semi-automate that process as well.
Notes:
- This guide is building on top of the Basic Marijuana Guide, it’s recommended that you have some experience with marijuana before following this one.
- This way of making Marijuana will be semi-automated and allow you to do other things in the meantime
You’ll need to purchase the following:
36x Marijuana Seeds
9x Bucket Pot
5x Soil Pack (1 soil pack can fill 2 Bucket Pots)
2x Microwave
2x Foil Machine
2x Small Light Tent
2x Water Extension Kit
4x Big Barrel O’ Water
The listed consumables are enough to sustain the operation for 40 minutes.
Preparing for the operation
Rent a Property of your choice, make sure it has at least 2 residential plugs as they will be needed for the Microwaves and Small Light Tents, it’s preferable if you select a room with 2 outlets as it may not require you to pick up the Wet Hash to move it around. The process of making Marijuana is illegal so make sure to pick a room with less exposure to the outside world as you wouldn’t want to get raided.
The Process
STEP 1: Place down the light tents
Deploy the Small Light Tents, you can use your physgun to freeze them in place, make sure you don’t break the small table on the side of them as it will be needed, avoid placing them in cramped places. Insert their electrical plugs into the socket.
STEP 2: Upgrading the tents
Stand close to one of the Small Light Tents and look towards it. Open your inventory, select the Water Extension Kit and choose the option “Use”. This will deploy a computer on the small table, repeat the process for the other tent.
STEP 3: Filling up with water
Look into the screen of the newly deployed Computers and you’ll see the operations available. Fill up the system with water by pressing “E” on the monitor (this will remove 1x Big Barrel O` Water from your inventory).
STEP 4: Placing down the Pots
Deploy the 9x Bucket Pots and drag them by hand into the Small Light Tents, the pots will snap into place. Remember the Tents can hold a maximum of 6 pots inside them, this is why 2 tents are needed. You can activate the watering system after this by pressing “ALT+E” on both tents monitors.
STEP 5: Placing down the soil and seeds
Just press “E” on the pots inside the tents to load them with soil, pressing “E” again on a pot with soil already inside it will plant a seed in it. It’s important that the water system has been turned on before this operation, otherwise the seeds will start dying immediately. Make Sure To Close the Tents after planting the seeds as the process will generate a strange smell which can lead to unwanted company.
STEP 6: Harvesting
Once the plants are ready they will display 0%, press “E” on the pots to harvest the marijuana. A single Big Barrel O’ Water can sustain the watering of 2 full harvests, so you can place new seeds inside the pots immediately after harvesting.
STEP 7: Drying and Packing
It’s recommended to place your Microwave and Foiling Machine in such a way so that once the Hash drops from the Microwave it will land on the Foiling Machine and semi-automate that process as well.